Difference between revisions of "Main Page"
From Nefmoto
(→Motronic 7 (ME7.x) Breakdown) |
MattyC2.7tt (Talk | contribs) m (Deleted a complaint that I made concerning my inability to register for the forum(2 months before Tony manually entered me)) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 29: | Line 29: | ||
*[[ME7 Communication Protocol Information]] | *[[ME7 Communication Protocol Information]] | ||
Manually translated modules | Manually translated modules | ||
| + | *[[ARMD 10.40 (Torque-Based Anti-Jerk Function)]] | ||
*[[ATM 33.50 (Exhaust Gas Temperature Model)]] | *[[ATM 33.50 (Exhaust Gas Temperature Model)]] | ||
*[[ATR 1.60 (Exhaust Gas Temperature Control)]] | *[[ATR 1.60 (Exhaust Gas Temperature Control)]] | ||
| Line 64: | Line 65: | ||
==Development== | ==Development== | ||
| − | |||
| − | |||
*[[ECU pin outs]] | *[[ECU pin outs]] | ||
Latest revision as of 12:47, 14 November 2016
Contents |
NefMoto Wiki - Welcome!
The NefMoto site is a collective body of VW/Audi ME7 ECU tuning information.
Overview
Flashing
- NefMoto ECU Flashing Software - Free, fast and reliable ECU flashing
- ECU Bench Flashing
- Galletto 1260 Flashing Cable - Recover a failed flash in boot mode
Software Tools
- NefMoto
- Me7 Logger
- ME7Check
- ECUxPlot
- ME7_95040 EEPROM programmer - Read over OBD / (Boot mode Write)
- Findmap v0.3b
- Galletto 1260
Motronic 7 (ME7.x) Breakdown
- S4Wiki.org Tuning guide <- A must read!
- Bosch ME7.x Funktionsrahmen
- Checksums
- ME7 Tuning Information
- ME7 Communication Protocol Information
Manually translated modules
- ARMD 10.40 (Torque-Based Anti-Jerk Function)
- ATM 33.50 (Exhaust Gas Temperature Model)
- ATR 1.60 (Exhaust Gas Temperature Control)
- BGSRM 17.10 (Cylinder Charge Detection, Intake Manifold Model)
- FUEDK 21.90 (Cylinder Charge Control, Calculating Target Throttle Angle)
- GGHFM 57.60 (MAF Meter System Pulsations)
- KRDY 17.120 (Dynamic Knock Control)
- KRRA 15.130 (Knock Control with Individual Cylinder Retard)
- LAMBTS 2.120 (Lambda for Component Protection)
- LAMFAW 7.100 (Driver's Requested Lambda)
- LAMKO 9.80 (Lambda Coordination)
- LDRLMX 3.100 (Calculation of LDR Maximum Cylinder Charge rlmax)
- LDRPID 25.10 (Charge Pressure Regulation PID Control)
- LRSHK 9.20 (Continuous Post-Catalyst Lambda Control)
- MDBAS 8.30 (Calculation of the Basic Parameters for the Torque Interface)
- MDFAW 12.260 (Driver Requested Torque)
- MDFUE 8.50 (Setpoint for Air Mass from Load Torque)
- MDKOG 14.70 (Torque Coordination for Overall Interventions)
- MDZW 1.120 (Calculating Torque at the Desired Ignition Angle)
- RKTI 11.40 (Calculation of Injection Time ti from Relative Fuel Mass rk)
- SLS 88.150 (Secondary Air Control)
- ZUE 282.130 (Fundamental Function - Ignition)
- ZWGRU 23.110 (Fundamental Ignition Angle)
Motronic MED9 Breakdown
- MED9 Abbreviations in English (A-C)
- MED9 Abbreviations in English (D-F)
- MED9 Abbreviations in English (G-L)
- MED9 Abbreviations in English (M-Q)
- MED9 Abbreviations in English (R-S)
- MED9 Abbreviations in English (T)
- MED9 Abbreviations in English (U-Z)
- Download all as Excel workbook
