Difference between revisions of "Getting Started"
From Nefmoto
MattDanger (Talk | contribs) (Initial version) |
MattDanger (Talk | contribs) (Formatting changes) |
||
| Line 1: | Line 1: | ||
| − | =Reading your car's stock file from the ECU | + | =Reading Your ECU= |
| − | Tony's free [[NefMoto ECU Flashing Software]] is the easiest and best supported method. You will need a cheap [[NefMoto ECU Flashing Software#Supported cables|flashing cable]]. | + | To read your car's stock file from the ECU you can use Tony's free [[NefMoto ECU Flashing Software]]. It is the easiest and best supported method. You will need a cheap [[NefMoto ECU Flashing Software#Supported cables|flashing cable]]. |
If someone goes wrong you will want to have a [[Galletto 1260 Flashing Cable]] to hopefully rescue the ECU in [[ECU Boot Mode|boot mode]] (a lower level protocol) | If someone goes wrong you will want to have a [[Galletto 1260 Flashing Cable]] to hopefully rescue the ECU in [[ECU Boot Mode|boot mode]] (a lower level protocol) | ||
| − | =Editing | + | =Map Editing= |
| − | [http://tunerpro.net Tunerpro] is a free map editor. WinOLS is a more expensive map editor. Most people use TunerPro. | + | To change your ECU tune will require map editing software. [http://tunerpro.net Tunerpro] is a free map editor. WinOLS is a more expensive map editor. Most people use TunerPro. |
TunerPro will need a definition file (.XDF) for the ECU file you want to edit. This tells TunerPro where the various maps and relevant data are in the file. There are several XDFs posted in the [http://www.nefariousmotorsports.com/forum/index.php/board,30.0.html Nefmoto Definition File subforum]. Many are works in progress, if you find an error please let the author know. | TunerPro will need a definition file (.XDF) for the ECU file you want to edit. This tells TunerPro where the various maps and relevant data are in the file. There are several XDFs posted in the [http://www.nefariousmotorsports.com/forum/index.php/board,30.0.html Nefmoto Definition File subforum]. Many are works in progress, if you find an error please let the author know. | ||
| Line 11: | Line 11: | ||
You will need knowledge of which maps perform what tasks and what data should be changed. Read the [http://s4wiki.org/wiki/Tuning S4Wiki.org tuning guide] and the [http://www.nefariousmotorsports.com/forum/index.php/board,2.0.html Nefmoto tuning subforum] | You will need knowledge of which maps perform what tasks and what data should be changed. Read the [http://s4wiki.org/wiki/Tuning S4Wiki.org tuning guide] and the [http://www.nefariousmotorsports.com/forum/index.php/board,2.0.html Nefmoto tuning subforum] | ||
| − | = | + | =File Checksums= |
| − | + | Your ECU file has several internal checksums that need to be updated when the file is altered. If these checksums are incorrect the car will not start. Or worse, it may start once or twice and catch the invalid checksum and leave you stranded. A lot of guys carry around a spare known working ECU as insurance. | |
More info about checksums: [http://www.andywhittaker.com/en-us/ecu/boschmotronicme71.aspx Andy Whittker's site] | More info about checksums: [http://www.andywhittaker.com/en-us/ecu/boschmotronicme71.aspx Andy Whittker's site] | ||
| Line 18: | Line 18: | ||
[http://www.mtx-electronics.com/automotive/page.php?25 MTX-electronics] sells an affordable TunerPro plugin that will correct checksums for ME7 | [http://www.mtx-electronics.com/automotive/page.php?25 MTX-electronics] sells an affordable TunerPro plugin that will correct checksums for ME7 | ||
| − | =Writing your tuned file back to the ECU | + | =Flashing the ECU= |
| − | + | Writing/flashing your tuned file back to the ECU is the same as the reading process above. Again, use the [[NefMoto ECU Flashing Software]] | |
| − | =Logging | + | =Logging= |
| − | *Vag-Com | + | Keep close track to how your car is performing after each tune revision. |
| + | *Vag-Com to check [http://s4wiki.com/wiki/LTFT LTFTs] (long term fuel trims) and other things | ||
*APR's ECUx. Not really supported anymore. | *APR's ECUx. Not really supported anymore. | ||
*We're hoping for more logging options in the near future. | *We're hoping for more logging options in the near future. | ||
Revision as of 11:38, 17 May 2011
Contents |
Reading Your ECU
To read your car's stock file from the ECU you can use Tony's free NefMoto ECU Flashing Software. It is the easiest and best supported method. You will need a cheap flashing cable.
If someone goes wrong you will want to have a Galletto 1260 Flashing Cable to hopefully rescue the ECU in boot mode (a lower level protocol)
Map Editing
To change your ECU tune will require map editing software. Tunerpro is a free map editor. WinOLS is a more expensive map editor. Most people use TunerPro.
TunerPro will need a definition file (.XDF) for the ECU file you want to edit. This tells TunerPro where the various maps and relevant data are in the file. There are several XDFs posted in the Nefmoto Definition File subforum. Many are works in progress, if you find an error please let the author know.
You will need knowledge of which maps perform what tasks and what data should be changed. Read the S4Wiki.org tuning guide and the Nefmoto tuning subforum
File Checksums
Your ECU file has several internal checksums that need to be updated when the file is altered. If these checksums are incorrect the car will not start. Or worse, it may start once or twice and catch the invalid checksum and leave you stranded. A lot of guys carry around a spare known working ECU as insurance.
More info about checksums: Andy Whittker's site
MTX-electronics sells an affordable TunerPro plugin that will correct checksums for ME7
Flashing the ECU
Writing/flashing your tuned file back to the ECU is the same as the reading process above. Again, use the NefMoto ECU Flashing Software
Logging
Keep close track to how your car is performing after each tune revision.
- Vag-Com to check LTFTs (long term fuel trims) and other things
- APR's ECUx. Not really supported anymore.
- We're hoping for more logging options in the near future.
Contribute
The open source VW/Audi ECU community is evolving nicely. Please help give back by providing your feedback and helping others.
Resources
Tuning
- The S4Wiki.org tuning guide is an incredible ME7 resource put together mostly by nyet. Check out the other articles on the site.
ME7 Documentation
- Funktionsrahmen - Bosch ME7 documentation
