Looking for KFDLBTS

Pages: [1]

« previous next »

Author

Topic: Looking for KFDLBTS (Read 6666 times)

phila_dot

Hero Member

Karma: +171/-11
Offline

Offline

Posts: 1709

	Looking for KFDLBTS « on: May 26, 2011, 11:17:08 PM »

All that I can find is DLBTS (not defined in the Funktionsrahmen) which has the same description as KFDLBTS, however, it is a 2D map. KFDLBTS should be a 3D map (DETAZWBS, NMOT).

Can anyone provide the correct information to add this to my XDF?


	Logged

setzi62

Full Member

Karma: +142/-0
Offline

Offline

Posts: 249

	Re: Looking for KFDLBTS « Reply #1 on: May 27, 2011, 02:43:10 AM »

I found that in CBox, MBox and some other "older" me7.5 images only
DLBTS[etazwbs] exists, while the "newer" ones have KFDLBTS[etazwbs, nmot].
Both maps contain the same value type (same scale) and are used at the same place
in the calculation formula.

If you have an image with DLBTS, you can use this curve the same as the map KFDLBTS,
but you don't have the possibility to define the delta depending on nmot.


	Logged

phila_dot

Hero Member

Karma: +171/-11
Offline

Offline

Posts: 1709

	Re: Looking for KFDLBTS « Reply #2 on: May 27, 2011, 09:23:51 AM »

Thank you.


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12233

	Re: Looking for KFDLBTS « Reply #3 on: May 27, 2011, 02:08:01 PM »

From my collection, looks like G box has DLBTS(2d), F box and 4Z7907551R have KDLBTS(3d)

Code:

4Z7907551R.csv:"KFDLBTS","0x1eea8","Delta Lambdasoll f�r Bauteileschutz","4x8","8 Bit","-","-","Upm","%","0.0078125","40.0","0.5","-0.28125","0.0","0xdc","0x0"
8D0907551F.csv:"KFDLBTS","0x1cb10","Delta Lambdasoll f�r Bauteileschutz","4x8","8 Bit","-","-","Upm","%","0.0078125","40.0","0.5","-0.1328125","0.0","0xef","0x0"
8D0907551G.csv:"DLBTS","0x1c4a9","Delta Lambdasoll f�r Bauteileschutz","8x1","8 Bit","-","-","%","-","0.007813","0.5","1.0","-0.179699","0.0","0xe9","0x0"
8D0907551M-20110511.csv:"DLBTS","0x1c4a7","Delta desired lambda for component protection","8x1","8 Bit","-","-","%","-","0.007813","0.5","1.0","-0.281268","0.0","0xdc","0x0"


« Last Edit: May 27, 2011, 02:11:19 PM by nyet »	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 23, 2024, 09:45:29 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search